Product Details:
|
Particle: | Tungsten Carbide | Material: | YG7,K25,cemented,TCT,Tungsten Carbide |
---|---|---|---|
Cut: | Standard/single/Double/ Aluma | Head Hardness: | 90-93.8HRA |
Certificate: | ISO 9001:2015 | Selling Units: | Single Item |
Single Package Size : | 10X7X4 Cm | Single Gross Weight: | 20.0 Kg |
High Light: | tungsten carbide burr bits,double cut carbide burr set |
Taichang Steel tungsten carbide rotary burrs grinding tools head of woodworking carbide cutter
Brief
Cemented carbide rotary file, also known as cemented carbide high-speed assorted milling cutter, cemented carbide die milling cutter, etc., is used together with a high-speed electric grinder or pneumatic tool. It can finish machining all kinds of metal mold cavity; clean up the flash, burr and weld of casting, forging and welding parts; process the chamfering, rounding, groove and keyway of all kinds of mechanical parts; polish the impeller flow passage part; clean up the pipe; finish machining the inner hole surface of mechanical parts; all kinds of metal and non-metal process carving, etc.
Chinese Grade |
Equal to ISO Category Number |
chemical composition |
Physical mechanical properties |
Application |
|||
WC | Co | Density | Bend Strength | Hardness | |||
% | % | g/Cm3 | N/mm2 | HRA | |||
YG3 | K01 | 96.5-97 | 3 | 14.9-15.3 | ≥1180 | ≥91.0 | It is suitable for the finishing of cast iron, non-ferrous metals, alloys and non-metallic materials, and semi-finishing vehicles for intermittent cutting. |
YG6X | K10 | 93.5 | 6 | 14.8-15.1 | ≥1420 | ≥92 | Finishing of chilled hard alloy cast iron and heat resistant alloy steel and ordinary cast iron |
YG6 | K20 | 94 | 6 | 14.7-15.1 | ≥1600 | ≥91 | Cast iron, non-ferrous metals and alloys, non-metallic materials, medium to cutting, semi-finishing and finishing. |
YG8 | K20-K30 | 92 | 8 | 14.5-14.9 | ≥1600 | ≥90 | Suitable for casting of cast iron, non-ferrous metals and their alloys and non-metallic materials. |
YG10 | K40 | 90 | 10 | 14.3-14.7 | ≥1900 | ≥89 | It is used for large batch production and has excellent strength and toughness. |
YG15 | K30 | 85 | 15 | 13.9-14.2 | ≥2100 | ≥87 | Forging, perforating and stamping tools for steel bars and steel tubes with high compression ratios and working under large stresses |
YG20 | K30 | 80 | 20 | 13.4-13.7 | ≥2500 | ≥85.5 | Stamping die, stamping watch parts, musical instrument spring piece; |
YG30 | 70 | 30 | 12.75 | ≥2500 | ≥82.8 | High toughness |
How to use the carbide burr
1.Speed /RPM
The speed at which you use your carbide bur in your rotary tool will depend on the material you're using it on and the contour being produced but it's safe to say you do not need to exceed speeds of 35,000 RPM. The table below shows some approximate speeds.
Diameter of Burr RPM
1.6mm or 1/16" 25,000 - 35,000
2.35mm or 3/32" 17,000 - 26,000
3mm or 1/8" 17,000 - 26,000
6mm or 1/4" 11,000 - 16,500
12mm or 1/2" 8,000 - 12,000
16mm or 5/8" 7,650 - 11,500
2.Apply only a little pressure
As with all drill bits and burrs, let the burr do the work and apply only a little pressure otherwise the cutting edges of the flutes will chip away or become smooth too quickly, reducing the life of your burr.
3. Keep The Carbide Burr On The Move
When using your carbide burr try not to keep it still for too long as this will prevent the burr from digging and jabbing into your material causing unsightly marks and roughness.
Our advantage:
1. High and new advanced equipment
2. The unique new technology: vacuum high temperature and high-pressure sintering. The product uses pressure sintering at the last stage, greatly reduces the porosity, improves the compactness, and greatly improves the mechanical properties of the product.
3. Our factory professionally produces customized, non-standard, special and non-magnetic parts.
4. Material: 100% virgin raw material with submicron grain size Grade: various grades for choice
5. With strict tolerance extent control, the tolerance can reach +/-0.01mm
6. Precision ground and polished
7. High wear resistance, high hardness and impact toughness Advanced technology, automatic pressing, HIP sintering and precision grinding
8. Having very good mechanical &chemical stability
9. High quality & reasonable price & fast delivery & best service.
FAQ
Q: Can I visit you?
A: Sure, we have a showroom in our factory.
Q: How can I get the sample to check your quality?
A: After price confirmation, you can require for samples to check our product’s quality. If you just need a blank sample to check the design and quality. We will provide you samples for free as long as you afford the express freight.
Q: What can I get the price?
A: We usually quote within 24 hours after we get your inquiry. If you are very urgent to get the price, please tell us in your email so that we will regard your inquiry priority.
Q: What is your term of delivery?
A: We accept EXW, FOB Shanghai or FOB Chengdu. You can choose the one which is the most convenient or cost-effective for you.
Contact Person: Mrs. Ava
Tel: +86-18602858660
Fax: 86-28-85988052